BNSCM - 6058, NON-FIBERED ASPHALT COATING/PRIMER

  • MSDS: BNSCM
  • Manufacturer: GIBSON HOMANS CO
  • Product Name: 6058, NON-FIBERED ASPHALT COATING/PRIMER
  • National Stock Number: 5610-00N030764
Product Identification

Product ID:6058, NON-FIBERED ASPHALT COATING/PRIMER
MSDS Date:01/08/1987
FSC:5610
NIIN:00N030764
MSDS Number: BNSCM

Responsible Party
GIBSON-HOMANS CO
1755 ENTERPRISE PARKWAY
TWINSBURG, OH 44087
US

Emergency Phone: 216-425-3255

Info Phone: 216-425-3255

Cage: GIBHO

Contractor
GIBSON-HOMANS CO
TWINSBURG, OH 44087 US

Telephone: 216-425-3255

Cage: GIBHO

Ingredients

STODDARD SOLVENT; (MINERAL SPIRITS)

CAS: 8052-41-3

RTECS: WJ8925000

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM; 9293

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:(ACUTE) SKIN: PROLONGED/REPEATED
CONTACT MAY CAUSE IRRITATION. EYES: MAY CAUSE IRRITATION, BLURRED
VISION. INHALATION: EXCESSIVE BREATHING OF HIGH VAPOR CONCENTRATION
CAN CAUSE NASAL AND RESPIRATORY I RRITATION, DIZZINESS, NAUSEA,
POSSIBLE UNCONSCIOUSNESS AND EVEN ASPHYXIATION. INGESTION: CAN
CAUSE GI (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: IRRITATION, NAUSEA, VOMITING &
DIARRHEA. (CHRONIC) UNKNOWN.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:SKIN: WASH WITH SOAP AND WATER. EYES: FLUSH WITH WATER FOR AT
LEAST 15 MINUTES. GET MEDICAL ATTENTION. INHALATION: REMOVE PERSON
FROM AFFECTED AREA. ADMINISTER OXYGEN IF NEEDED. INGESTION: DO NOT
INDU CE VOMITING. GET MEDICAL ATTENTION.

Fire Fighting

Flash Point Method:PMCC
Flash Point:>100F,>38C
Lower Limits:0.8%
Upper Limits:7.0%
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICALS.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . WATER MAY CAUSE FROTHING, APPLY CAUTIOUSLY.
Unusual Fire/Explosion Hazard:KEEP AWAY FROM SOURCES OF IGNITION.

Accidental Release

Spill Release Procedures:DIKE SPILL AREA. REMOVE SOURCES OF IGNITION.
VENTILATE AREA IF NECESSARY. RECOVER FREE LIQUID. ADD ABSORBENT TO
SPILL AREA.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP AWAY FROM SOURCES OF IGNITION.
USE ONLY WITH ADEQUATE VENTILATION. AVOID PROLONGED/REPEATED
CONTACT WITH SKIN.
Other Precautions:KEEP OUT OF REACH OF CHILDREN.

Exposure Controls

Respiratory Protection:NOT NORMALLY NEEDED IN WELL VENTILATED AREA. IF
TLV IS EXCEEDED A NIOSH/MSHA APPROVED BREATHING APPARATUS IS
RECOMMENDED.
Ventilation:LOCAL EXHAUST AS NECESSARY TO REMAIN BELOW TLV LEVEL.
OTHER: VENTILATE IF HIGH VAPOR CONC EXISTS.
Protective Gloves:OIL RESISTANT GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NOT APPLICABLE.
Work Hygienic Practices:AVOID PROLONGED OR REPEATED CONTACT WITH SKIN.
REMOVE CONTAMINATED CLOTHING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:>300F,>149C
Vapor Pres:2.0PSI@25C
Vapor Density:>1
Spec Gravity:1.0 (H2O=1)
Evaporation Rate & Reference:<1 (BUTYL ACETATE=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:BLACK LIQUID, SOLVENT ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NOT APPLICABLE.
Hazardous Decomposition Products:CO2, CO.

Disposal

Waste Disposal Methods:DISPOSE OF ACCORDING TO FEDERAL, STATE AND LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.